Specifications

Phone: [phone]
Fax: [phone]
32
REC-3610ROBO*CRIMP
TM
15 Ton Compression Tool with 2” Jaw Opening
The REC-3610 is our 15 ton compression tool that is able to crimp splices and
lugs up to 1250 MCM aluminum and 1500 MCM copper. The REC-3610 offers a wide
handle opening with finger grooves, allowing easy access for gloved work.
The base of the tool is contoured for stability and incorporates finger grooves for a
better grip. The tool has a latched head and its pull-out release pin cannot be entirely
removed from the jaw. The jaw opens wide to accept all “P” type dies used in the
industry today. The PU-15 die adapter is available for use with all 12 ton “U” type
dies.
For additional ordering information, please refer to page 10.
Features
•TestedUpto75kV
•RotationalHead
•RapidAdvance
•ErgonomicallyBalanced
•WeatherResistantHousing
•AudibleBypasswhenPredeterminedPressure
is Achieved
•IncludesDIE-CASE
•ProtectiveRubberBootonHead
•Flip-TopRotatingHead
•ExternalPressureAdjustment
•5YearWarrantyonTool,Battery&Charger
Specifications
Output 15 Ton
Weight 24 lbs. with Battery
Size 21.5”L x 10.5”H x 3.5”W
JawOpening 2”
Crimping Estimates
BP-80
1000 MCM Cu 40
Connector Range
Aluminum #8 AWG-1250 MCM
Copper #8 AWG-1500 MCM
H-Tap Up to 750/750
Accepts “P” Type Dies
• See Page 66 for
Available Huskie Dies
Optional Accessory
PU-15 “U” Die Adapter, p. 93
PU-15
“U” Die
Adapter
Robo batteRy opeRated tools - ReC line