Specifications

www.huskietools.com 31
The REC-5510K battery powered compression tool is designed to accept
Kearney WH-2, PH-2 and WH-3 style dies. Weighing just 16.5 pounds it was
specifically designed for use in single-handed operation in overhead applications
such as cable tray. It also eliminates the cumbersome hoses and larger, heavier tools
traditionally used in overhead work.
The REC-5510K was designed from the same hydraulic system as our REC-558U
featuring a rapid advance ram to reduce cycle time. It has a full 12-ton capacity and
its 1.5 inch jaw opening accepts lugs up to 1033 MCM. Compression head rotates
360° for use in any position.
For additional ordering information, please refer to page 10.
REC-5510KROBO*CRIMP
TM
12 Ton Compression Tool with 1.5” Jaw Opening
Robo batteRy opeRated tools - ReC line
Features
•OneHandOperation
•TestedUpto75kV
•RotationalHead
•RapidAdvance
•ErgonomicallyBalanced
•ErgonomicPistolGripHandle
•WeatherResistantHousing
•AudibleBypasswhenPredeterminedPressure
is Achieved
•ProtectiveRubberBooton“C”HeadFor
Brush Contact
•5YearWarrantyonTool,Battery&Charger
Specifications
Output 12 Ton
Weight 16.5 lbs. with Battery
Size 16”L x 12”H x 3”W
JawOpening 1.5”
Crimping Estimates
BP-80
500 MCM Cu 60
750 MCM Cu 45
Connector Range
Lugs 1033 ACSR
Splices 477 ACSR
Accepts “WH-2”, PH-2” and
“WH-3” Type Dies
• See Page 66 for
Available Huskie Dies
Optional Accessories
UDK-1 “U” Die Adapter, p. 93
HTK-CASE WH-2, PH-2, WH-3 Die
Specific Case, p. 69
UDK-1
“U” Die
Adapter