Specifications

www.huskietools.com 29

The REC-5510 was specifically designed for use in single-handed operation in

overhead applications such as cable trays. This allows one hand to control the work

while the other hand is free to operate the tool. It also eliminates the cumbersome

hoses and larger, heavier tools traditionally used in overhead work.

The REC-5510 has the same jaw opening as our REC-3510 battery operated 12-

ton compression tool. The opening is 1.65” which will accept mid-span copper and

aluminum splices and lugs up to 750 MCM Cu/Al. This tool accepts all “U” type dies

available on the market.

Portability and handling are made easier because the REC-5510 system is self-

contained and compact. The new rapid advance system reduces tool run time, giving

you more crimp cycles per battery charge. A built-in, pre-set 10,000 psi bypass

cartridge will audibly “bypass” when the optimal pressure is achieved.

For additional ordering information, please refer to page 10.

REC-5510ROBO*CRIMP

12 Ton Compression Tool with 1.65” Jaw Opening

Robo batteRy opeRated tools - ReC line

Features

•OneHandOperation

•TestedUpto75kV

•RotationalHead

•RapidAdvance

•ErgonomicallyBalanced

•ErgonomicPistolGripHandle

•WeatherResistantHousing

•AudibleBypasswhenPredeterminedPressure

is Achieved

•ProtectiveRubberBooton“C”HeadFor

Brush Contact

•5YearWarrantyonTool,Battery&Charger

Specifications

Output 12 Ton

Weight 15 lbs. with Battery

Size 16”L x 12”H x 3”W

JawOpening 1.65”

Crimping Estimates

BP-80

4/0 Cu 90

500 MCM Cu 60

Connector Range

Lugs and Splices Up to 750 MCM Cu/Al

Accepts “U” Type Dies

• See Page 65 for

Available Huskie Dies

Optional Accessory

DIE-CASE Die Case, p. 69