Specifications

Phone: [phone]
Fax: [phone]
28
REC-3510ROBO*CRIMP
TM
12 Ton Compression Tool with 1.65” Jaw Opening
The REC-3510 is the largest in our line of battery operated 12 ton compression
tools. The jaw opening is 1.65” and will accept mid-span copper and aluminum
splices and lugs up to 750 MCM Cu/Al. When the sleeves are compressed they can
be removed through the large jaw. This tool accepts all “U” type dies available on
the market.
A built-in, preset 10,000 psi bypass cartridge will audibly bypass when optimal
pressure is achieved. Test dies accompanied with our PG-4 can confirm the output
pressure when needed. The output pressure can be adjusted via a bypass port
located at the top of the tool. This tool has the most universal range of all our self-
contained ROBO* tools.
For additional ordering information, please refer to page 10.
Robo batteRy opeRated tools - ReC line
Features
•TestedUpto75kV
•RotationalHead
•RapidAdvance
•ErgonomicallyBalanced
•WeatherResistantHousing
•AudibleBypasswhenPredeterminedPressure
is Achieved
•IncludesDIE-CASE
•ProtectiveRubberBooton“C”HeadFor
Brush Contact
•ULClassified
•5YearWarrantyonTool,Battery&Charger
Specifications
Output 12 Ton
Weight 20 lbs. with Battery
Size 19”L x 10.5”H x 3.5”W
JawOpening 1.65”
Crimping Estimates
BP-80
500 MCM Cu 60
750 MCM Cu 45
Connector Range
Lugs and Splices 750 MCM Cu/Al
Accepts “U” Type Dies
• See Page 65 for
Available Huskie Dies