Specifications

www.huskietools.com 27
The REC-5430 weighing just 14.75 pounds was specifically designed for use in
single-handed operation in overhead applications such as cable trays. This allows
one hand to control the work while the other hand is free to operate the tool. It
also eliminates the cumbersome hoses and larger, heavier tools traditionally used in
overhead work.
The REC-5430 was designed from the same hydraulic system as our REC-558U
featuring a rapid advance ram to reduce cycle time. It accepts all 12 ton “U” type
dies and is capable of 750 MCM copper lugs and 600 MCM copper splices.
For additional ordering information, please refer to page 10.
REC-5430ROBO*CRIMP
TM
12 Ton Compression Tool with 1-3/16” Jaw Opening
Robo batteRy opeRated tools - ReC line
Features
•OneHandOperation
•TestedUpto75kV
•RotationalHead
•RapidAdvance
•ErgonomicallyBalanced
•ErgonomicPistolGripHandle
•WeatherResistantHousing
•AudibleBypasswhenPredeterminedPressure
is Achieved
•ProtectiveRubberBooton“C”HeadFor
Brush Contact
•5YearWarrantyonTool,Battery&Charger
Specifications
Output 12 Ton
Weight 14.75 lbs. with Battery
Size 15.5”L x 12”H x 3”W
JawOpening 1-3/16”
Crimping Estimates
BP-80
500 MCM Cu 60
750 MCM Cu 45
Connector Range
Lugs 750 MCM Cu/Al
Splices 600 MCM Cu/Al
Accepts “U” Type Dies
• See Page 65 for
Available Huskie Dies
Optional Accessory
DIE-CASE Die Case, p. 69