Specifications

www.huskietools.com 25
The REC-5750 is a flip-top, dieless tool used to crimp cables up to 750 MCM.
The flip-top latch opens to allow for easy cable positioning and removal. The dieless
system is used for non-tension splices and terminations. There is one stationary
and three movable indenting nibs which close at 90° angles to each other so that
the connector is squeezed equally at four strategic points with 6 tons of force. The
top can be unlatched to accommodate larger size lugs and cables up to 750 MCM.
Typical applications include in-line splicing connectors and lug terminations. The
REC-5750 is designed to crimp Anderson Style connectors. Other brand connectors
manufactured to ANSI specifications C119.4 can be used. For range-taking
connectors, the cable must be maximum size specified for the connector. Consult
your connector manufacturer for dieless applications.
It also has an external bypass cartridge for faster pressure adjustment & repair times.
NOTE: For range taking connectors, the cable must be the maximum size specified
for the connector. Consult you connector manufacturer for dieless applications.
For additional ordering information, please refer to page 10.
REC-5750ROBO*CRIMP
TM
6.2 Ton Flip-Top Dieless Compression Tool with 1.5” Jaw Opening
Robo batteRy opeRated tools - ReC line
Features
•OneHandOperation
•TestedUpto75kV
•RotationalHead
•RapidAdvance
•ErgonomicallyBalanced
•ErgonomicPistolGripHandle
•WeatherResistantHousing
•AudibleBypasswhenPredeterminedPressure
is Achieved
•*DesignedtocrimpAndersonconnectors&
other brand connectors manufactured to
ANSI C119.4
•Flip-TopHeadDesign
•EliminatestheNeedforDies
•5YearWarrantyonTool,Battery&Charger
Specifications
Output 6.2 Ton
Weight 12 lbs. with Battery
Size 15.5”L x 13”H x 2.5”W
JawOpening 1.5”
Crimping Estimates
BP-80
1/0 Cu/Al 90
500 MCM Cu 110
*Connector Range
Lugs and Splices #6 AWG–750 MCM