Specifications

www.huskietools.com 21
The REC-558U was designed to squeeze commonly used service entrance
connectors, including lugs, sleeves, H-Taps and C-Taps. The rapid advance feature
allows the operator quicker compression cycles. In addition to the rapid advance
feature, it also has incorporated an electronic counter that will allow a service
technician to read the number of compression cycles the tool has made. Also, the
new tool housing has been reinforced to improve durability during heavy field use.
A factory pre-set bypass cartridge assures a six ton compression every time. The REC-
558U accepts either “W”, “O” or “X” type dies. The D3 nest die comes standard
with the tool. Always consult your connector manufacturer for proper die/connector
combinations.
The REC-558U will accept the optional 25CAT cutter head attachment. Quick release
pins allow the operator to change between compression and cutter head in one
minute with no springs or pins to lose.
For additional ordering information, please refer to page 10.
REC-558UROBO*CRIMP
TM
6 Ton Compression Tool with 1.8” Jaw Opening
Robo batteRy opeRated tools - ReC line
Specifications
Output 6 Ton
Weight 8 lbs. with Battery
Size 13”L x 12”H x 2.5”W
JawOpening 1.8”
Crimping Estimates
BP-80
#6 Cu/Al 250
1/0 Cu/Al 195
4/0 Cu/Al 150
Connector Range
Lugs and Splices #8-500 MCM Cu
#8-300 MCM Al
H-Taps Up to 4/0-4/0
25CAT*
(optional)
p. 93
Features
•OneHandOperation
•TestedUpto75kV
•RotationalHead
•RapidAdvance
•ErgonomicallyBalanced
•ErgonomicPistolGripHandle
•WeatherResistantHousing
•AudibleBypasswhenPredeterminedPressure
is Achieved
•InterchangeableCutterHead
•5YearWarrantyonTool,Battery&Charger
* Will not cut ALL 500 MCM copper cable-consult factory.
Accepts “W”, “O” and “X”
Type Dies
• See Page 64 for
Available Huskie Dies
Optional Accessories
25CAT Cutter Head, p. 93
HT58CUT Cutter Die, p.64
ROB-358N
InsulatedJaw