User`s guide

bizhub C652/C652DS/C552/C552DS/C452 5-21

5.4 Application

5.4.1 Sheet/Cover/Chapter Insert

OHP Interleave

Prevent copies printed onto OHP transparencies from sticking together because of the heat produced during

copying by having paper (interleaves) inserted between the transparencies.

0 Printing on OHP transparencies is possible only in black.

0 Use interleaf paper with the same size as the OHP transparencies.

0 The number of copies is fixed to one. You cannot change.

0 The finishing function cannot be changed.

0 Load transparencies into the bypass tray.

0 Do not use a transparency that has been through the machine even once. It may lead to reduced print

quality, a paper jam or a damage to the machine. (Even if a transparency has been discharged without

printing, it cannot be reused.)

1 Load the original.

2 Press [Basic] ö [Color] ö [Black].

3 Load transparencies into the bypass tray. Load the interleave paper into the desired paper tray.

4 Set the paper type of the bypass tray to [Transparency] and press [OK].

5 Press [Application] ö [Sheet/Cover/Chapter Insert] ö [OHP Interleave].

d Reference

Setting Black for Color Settings:

Press [Basic] ö [Color] ö [Black].

Settings

Interleave Paper Select the paper tray loaded with paper with a transparency interleaf.

Transparency Indicates the paper size of the loaded transparency.

EFGH