User`s guide

bizhub C652/C652DS/C552/C552DS/C452 13-8
13.3 Glossary
13
Finishing Preview Function that allows you to check the finishing status with a preview image be-
fore printing.
Finishing Program Allows you to select a preset offset or finishing method.
Glossy Function that improves the glossy level of an image.
Green Function that adjusts the level of green in the image, for example, if you wish to
emphasize the green of forests and trees.
Group (Access per-
mission)
Function that limits the addresses that can be accessed by each user in order to
assure security.
Group (Copy or Fin-
ishing)
Function that prints copies in pages. This function first prints the specified
number of copies of the first page, and then prints the second page in the same
way.
Half-Fold Function that folds printed paper in half.
Hue Function that adjusts the hue level to make the image either more reddish or
more bluish.
Manual Function that enlarges or reduces the loaded original with the zoom ratio speci-
fied using the keypad, and copies it on paper.
Minimal This setting slightly reduces the image of the original and copies it at the center
of the paper.
Mirror Image Function that produces a copy in the mirror image of the original.
Mixed Original Function that detects the size of each original page and prints a copy on paper
of the appropriate size when loading originals in different page sizes into the
ADF.
Neg./Pos. Reverse Function that copies the original with the light- and dark-colored areas or the
colors (gradations) of the image reversed.
Offset Function that sorts copies.
Original Direction Function that allows you to configure the orientation of the original that was
placed in the ADF or on the original glass.
Original Type Function that allows you to select the desired functions according to the original
text or image type and adjust it to obtain better image quality.
Paper Allows you to configure the type and the size of the paper to be printed on.
Proof Copy Function that prints a sample copy and stops printing temporarily before printing
a large number of copies. This prevents copy errors from occurring in a large
number of copies.
Punch Function that punches copies for filing.
Red Function that adjusts the level of red in the image, for example, if you wish to red-
den skin tones.
Saturation That adjusts the degree of vividness of the colors in the image.
Save in User BOX Function that temporarily saves the job on the hard disk so that it can be recalled
later and used again.
Separate Scan Function that divides the original into multiple parts for scanning when the
number of original pages exceeds the maximum (100 pages) that can be loaded
into the ADF. You can scan the original and batch-copies it as one copy job. You
can also load the original on the original glass or switch to the ADF during scan-
ning.
Sharpness Function that emphasizes the edges of text so that it can be read more easily.
This function also enables you to adjust the original image.
Sheet/Cover/Chap-
ter Insert
Allows you to configure editing functions according to your copying requirement.
Sort Function that prints a document in sets of copies. The second copy set is printed
after all of the first copy set is finished.
Staple Function that staples copies.
Text Enhancement Function that allows you to configure the reproduction quality of the text when
copying originals consisting of text that overlaps images such as illustrations or
graphs (text with a background).
Term Description