User`s guide

bizhub C652/C652DS/C552/C552DS/C452 7-55
7.10 Security Settings
7
If [Enhanced Security settings] is enabled, various security functions are configured to allow you to ensure
the higher-level security of data management. For details, contact your service representative. To enable the
enhanced security mode, the following settings must first be configured. Different screens appear depending
on the current settings.
7.10.6 HDD Settings
This setting is for the hard disk operations. For details, refer to the "User's Guide [Box Operations]".
System Connection / OpenAPI Setting Set to [SSL Only].
Security Settings / User Box Administrator Setting Set to [Restrict].
Security Settings / Security Details / Password
Rules
Set to [Enable].
Security Settings / Security Details / Prohibited
Functions When Authentication Error
Set to [Mode 2], and the number of tries is set to 3.
• The number of tries can be changed to 1, 2, or
3.
Security Settings / Security Details / Prohibited
Functions When Authentication Error / Release
Time Settings
The allowable setting range is limited to 5 or more
minutes. This value cannot be less than 5 minutes.
Security Settings / Security Details / Confidential
Document Access Method
Set to [Mode 2].
Security Settings/Security Details/Print Data Cap-
ture
Set to [Restrict].
Security Settings/Security Details/Hide Personal
Information (MIB)
Set to [ON].
Security Settings / Security Details / Initialize / Net-
work Settings
[Network Settings] is not displayed.
Security Settings/Security Details/Job History
Thumbnail Display
Set to [OFF].
Security Settings / Image Log TX Setting Set to [OFF].
Review Secure Print User Box Only the list is displayed before the password au-
thentication is performed.
[Network] in PageScope Web Connection / E-Mail
Setting / S/MIME
[Automatically Obtain Certificates] is set to [No].
[E-Mail Text Encryption Method] is set to [3DES].
[Maintenance] in PageScope Web Connection /
Reset / Network Setting Clear
[Network Setting Clear] is not displayed.
[Security Administrator] in PageScope Web Con-
nection / Password Setting
[Administrator Password Setting] is not displayed.
CS Remote Care Restricts the device setting in the remote mode
based on CS Remote Care.
Administrator Settings Settings to forcibly changed