User`s guide

bizhub C652/C652DS/C552/C552DS/C452 7-47
7.9 System Connection
7
7.9 System Connection
Configure settings for software, cellular phone, or PDA that can be accessed with this machine.
% [Utility/Counter] ö [Administrator Settings] ö [System Connection]
Settings
OpenAPI Settings Access Setting Specify whether to allow the user to access this
machine from other system that is using OpenAPI.
SSL/Port Settings SSL Setting To use SSL encryption,
select [SSL Only] or
[SSL/Non-SSL].
• If Enhanced Securi-
ty Mode is enabled,
[SSL Only] is ena-
bled.
Port No. Enter a port number.
Port No. (SSL) Enter the port number
to be used for SSL
communication.
Client Certificate Re-
quest
Specify whether to ena-
ble a client certificate
request. If you authenti-
cate the client by re-
questing for its
certificate (verification
of client certificate), se-
lect [Enable].
Certificate Verification
Level Settings
To verify a certificate,
configure settings to
verify the certificate.
[Validity Period]:
Select whether to
check that the target
certificate is within the
validity period.
[Key Usage]:
Select whether to
check that the certifi-
cate key is being used
properly.[Chain]: Se-
lect whether to check
that the certificate
chain (certification
path) is correct.
[Expiration Date Confir-
mation]:
Select whether to
check the target certifi-
cate for validation.
[CN]:
Select whether to
check that the CN of
the certificate matches
the server address.
Authentication Specify whether to authenticate an access from
other system that is using OpenAPI.
• To authenticate, enter the login name and
password in [Login Name] and [Password]
• When user authentication is performed or when
acquiring the device information with the Page-
Scope Authentication Manager, set the Au-
thentication setting of the OpenAPI Setting
screen of the machine to [OFF].
Automatic Prefix/Suffix
Setting
Select whether to automatically add prefix and suffix to a destination number.
If [Automatic Prefix/Suffix Setting] is set to [ON], the other settings will be re-
stricted. For details, refer to the "User's Guide [Network Administrator]".