Operator`s manual
Grass Trimmer/Brush CuTTer
OperaTOr's manual
25
1. Remove air cleaner cover.
2. Remove spark plug lead.
3. Remove mufer cover (A).
4. Remove engine cover (B).
IMPORTANT
DO NOT use a metal scraper to remove dirt from the cylinder ns.
5. Use brush to remove dirt from the cylinder ns.
6. Remove grass and leaves from the grid between the recoil starter
and fuel tank.
7. Assemble components in reverse order.
eXhaust system
Spark Arrestor Screen
Level 2.
Parts Required: Spark Arrestor Screen, Gasket
A
B
1. Remove mufer cover (A).
2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
A