Instruction manual

Safety Policy
● Meaning of signal words
■ Notational conventions used in this manual
Notes and cautions are described in the following styles in this manual:
■ Glossary
For explaining the operation of the converter, the following terms are being used.
Warning: This indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Caution:
This indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury. It may also be used to alert against unsafe
practices.
Mandatory: This indicates actions you are required to do. The actual content of requirement is
described using figures and text along with pictographs.
Prohibited: This indicates actions you are prohibited to do. The actual content of prohibition is
described using figures and text along with pictographs.
Term Explanation
Long press To hold down the object until the lamp lights or the display changes.
Single press To lightly press the object once.
Flash To flicker quickly several times, and the setting is established.
Warning
Electric Shock
Make sure that no electric power is supplied to the instrument before starting this
work.
Do not turn on the power until your work is completed.
Caution
When the instrument is turned off, the C-NC contact is shorted. Be careful when
connecting a load.
Mandatory
To connect a load beyond the contact capacity or use inductive load (such as a
motor, or pump), be sure to use a power relay whose rating is higher than the load.
Prohibited
Do not operate the keys or push the panel surface with a sharp object, such as the
fingernail.