Instruction manual
4 Measurement
30
Decimal place selection
Select the decimal place (displayed digits) for displaying temperatures.
1. Open the basic setup menu and press the UP/DOWN keys to display the current
sub-display setting on the panel, referring to “ How to open basic setup menus”
(page 19).
The setup item selection screen is displayed on the measurement display, showing the
display for sub-display setting, “S.dSP”.
2. Display “t.drG” on the measurement display using the DOWN key, and press the
ENT key.
The sub-display starts blinking. Now you can change the setting.
3. Select the decimal place from 1, 0.1, and 0.01 using the UP/DOWN key.
4. Press the ENT key to establish the setting.
Tip
z To set another item in the display setting next, press the UP key to display it.
z To return to the basic setup menu, press the MEAS key.