Instruction manual

Conformable Directive
This equipment conforms to the following directives and standards;
FCC rules
■ WARNING
This equipment has been tested and found to comply with the limits a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provided reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and radiates radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Installation Environment
• Pollution Degree2
Directives: The EMC Directives 89/336/EEC in accordance with Article 10 (1)
of the Directive.
The Low Voltage Directive 73/23/EEC
Standard: [The EMC Directive] EN61326: 1997 + A1: 1998 + A2: 2001
(Emission: Class A, Immunity: for Industry location)
[The Low Voltage Directive] EN61010-1: 2001
This equipment shall not be used in the residential, commercial and
light-industrial environment.
Note
If the sensor cable, transmission cable, or junction cable is extended to 30 m or
longer, this product does not conform with the serge immunity specified in the EMC
directives.