Service manual

450V PARTS DIAGRAM / DIMENSIONAL DRAWING
To order specify model number
(ex - 450VMX) followed by item;
(1) Housing
(2) Gear Set
(3) End Plate Gasket
(4) Idler Shaft
(5) Drive Shaft
(6) End Plate
(7) Adjuster Nut
(8) Adjuster Nut O-ring
(9) Relief Valve Assembly
(10) O-ring RV plate
(11) Bearing Cap
(12) O-ring Cover Plate
(13) Bushing
Modified Seal
(14) M24/Housing Assembly
(15) Shaft Seal
(16) Dust Seal and Mount
Bracket
Heat fittings. All tapped ports require a
#12 O-ring Fitting. DO NOT USE
PIPE THREAD FITTINGS!
(20) #12 MB O-ring Plug
(21) #12 MB O-ring Straight
(22) J-tube
(23) #12 MB O-ring Elbow
To order specify model number
(ex - 450VMX) followed by item;
(1) Housing
(2) Gear Set
(3) End Plate Gasket
(4) Idler Shaft
(5) Drive Shaft
(6) End Plate
(7) Adjuster Nut
(8) Adjuster Nut O-ring
(9) Relief Valve Assembly
(10) O-ring RV plate
(11) Bearing Cap
(12) O-ring Cover Plate
(13) Bushing
Packed Seal (not shown in drawing)
(17) 9-Ring Packing Set
(18) Packing Gland (2 pc)
(19) Studs/Clips/Washers/Nut (2)
Hardware items can be obtained from
a local hardware store.
(A) 1/4 Key stock 2” Lg
(B) 1/2 Dowel pin 1-1/4” Lg
(C) 3/8-16x3/4 Socket Head
(D) 1/4-20x3/8 Socket Head
(E) 3/8-16x1/2 Set Screw
BearCat Pumps, LLC
[phone]
14