Technical data

2. Processes and functions

II - 18

(1) When the unit is stopped, the Auto-flap returns to F5 position.

(2) When the airflow direction is set (an optional setting), the auto and Swing settings will

be released. To return the mode to auto-flap control, change the operation mode.

(3) Once Auto-flap is set, the flap position will be input in the memory.

(4) When the operation mode is changed, the unit starts to search flap position. (if a

search action for sensing flap position is not succeeded in one minute, only the swing

is operated.)

2-17

Auto-flap Control

(Indoor Unit : 4-Way Air Discharge Semi-Concealed Type

Ceiling-Mounted Type)

Auto flap can control the air flow in 5 steps.

Fig. 21

Operation mode

Flap position

Automatic setting Optional setting

Cooling/dehumidifying F2 F1 • F2 • F3 • Swing

Fan F2 F1 • F2 • F3 • F4 • F5 • Swing

Heating F4 F1 • F2 • F3 • F4 • F5 • Swing

Standby for heating

F2 (The flap returns to the original position after

release of the standby mode.)

1328_M_I

60°

Heating F1~F5

Cooling F1~F3