Specifications

MODEL Description
E-Storm-Eye Thermal Imaging Camera with 100 mm Lens
E-Storm-Eye-Mini Thermal Imaging Camera with 50 mm Lens
E-EyeM32OB Thermal Imaging Camera with Interchangable lens
29
Thermal Imaging Cameras
E-Storm-Eye Thermal Imaging Camera
We are proud to introduce our new range of thermal imaging camera products.
The E-STORM-EYE camera provides night vision capability for civilian, military and paramilitary sur-
veillance, detection and protection applications.
FLIR SENSOR
The heart of the E-Storm-Eye is it's imaging sensor. This French made sensor used is an uncooled
320x240 micro-bolometer detector module, which provides advanced thermal imaging in the 8-14µ
spectral band. There are many benefits to using uncooled FLIR technology to collect light in the
8 – 12µm spectral band.This band provides a better penetration through smoke, smog, dust and
water vapor because the wavelength is much longer than the 3 – 5 µm spectral band which normal
CCD cameras utilise.
ANALOG VIDEO OUPUT
A DSP processor drives the camera and converts the representation detected by the sensor to an
image which can be outputted in analog video format for display on a monitor.This can be CCIR 50Hz
@ 75ohm or RS170 60Hz @ 75ohm.
REMOTE CONTROL
For control of the cameras from a distance, it features an RS422 interface which can be interface to
a PC with custom software. Several camera modes can be set from this.
OTHER FEATURES
Some of the other features of the E-Storm-Eye camera range include the following:
⊕ Unique Digital Signal Processing (DSP) algorithms
⊕ Self-monitoring Built-in-Test (BIT) functionality
⊕ Field-level Built-in Go/No Go Tester
⊕ Anti-blooming technology
⊕ External video synchronization
APPLICATIONS
Typical applications for the E-Storm-Eye camera include nightime perimeter surveillance of sensitive
sites and areas such as national borders, airport boundaries, pipelines, oil terminals, electricity gener-
ating stations, communication transmitters and prisons. As the main component of these cameras is
an infra-red thermal sensor, it can also detect overheating and fires, before flames and smoke become
visible.This makes it a highly cost-effective device for early-warning and/or predictive maintenance in
power stations and in industrial process control.
MODELS
The camera can be mounted in a fixed or mounted on a vehicle for mobile reconnaissance.Two mod-
els are currently available, the E-Storm-Eye and the E-Storm-Eye-Mini. The E-Storm-Eye is fitted with
a 100 mm lens and the E-Storm-Eye-Mini with a 50 mm lens.An OEM unpackaged product can also
be supplied for integration into a customer's existing electronics.
Specifications
Thermal Video Image
E-Storm-Eye
E-Storm-Eye-Mini
E-EyeM32OB
CAMERAS
MODEL Storm-Eye Storm-Eye Mini E-EyeM32OB
Focal Plane Array Micro-bolometer Micro-bolometer Micro-bolometer
Spectral range 8-12 µm 8-12 µm 8-12 µm
Number of Pixels 320x240 320x240 320x240
Focal length 100 mm 50 mm Selection of lenses from 12 ~ 210mm
Field of View 8.45°H x 6.33°V 16.7°H x 12.66°V Depending on lens fitted
Video Output CCIR or RS-170 CCIR or RS-170 CCIR or RS-170
Remote control RS422 or RS232 RS422 or RS232 RS422 or RS232
Remote Control Operation AGC, Focus (Manual), Contrast, On\Off, Video, Polarity, NUC Video
Operating Voltage 12VDC Nominal 12VDC Nominal 2VDC Nominal
NETD < 100° mK < 100° mK < 100° mK
Detection Range (Human being) Better than 800 metres Better than 400 metres Depending on lens fitted
Recognition Range (Human being) Better than 300 metres Better than 150 metres Depending on lens fitted
Operating Temp. - - -20º ~ +50º C
Environment Qualification None None IP65