Specifications

23
Cameras
CAMERA
⊕ Camera - B/W 1/3" 420TVL CCD
⊕ Lens - 3.7 mm (F2.0)
⊕ Min Illumination - 0.1 Lux (F2.0)
⊕ S/N Ratio - Better than 48db
⊕ External Video Inputs - 2 x Composite Video
⊕ External Video Output - 1 x Composite Video
DIGITAL VIDEO CAPTURE
⊕ Storage Medium - Removable MMC Memory Card 16MB (std), 32MB, 64MB,
128MB (available)
⊕ Typical Capturing Quantity - 1500 images (8MB) 6000 images (32MB)
⊕ Picture Format - JPEG with automatic Thumbnails Support
⊕ Quality Options - Medium, Good, High and Super modes, (from 5k up to 20k)
⊕ Watermarking - Digital Signature for each image
⊕ Recording Rate - From 3 images/sec to 1 image per 5 minutes
⊕ Recording Options - Fixed (Until memory is full) or Cyclic (Records Over)
ALARM ACTIVATION
⊕ Dual-Element PIR Detector - Built-in
⊕ External Alarm Input - Isolated dry contact input
⊕ Relay Output - 28VDC @ 0.1A with 10ohm serial resistor (opens for 1.6 sec)
⊕ Tamper switch - If cover is removed
⊕ Delay time between alarm triggers - 1 sec to 5 minutes
⊕ Number of images per event - 1 to 100 images
⊕ PIRCoverage - Wide angle 90deg (18 m x 18 m)
POWER
⊕ Optional Separated Power feeds - For PIR and Recording module sections
⊕ EMI Protection - 50,000V of electric interference from lightning or surge
⊕ Power consumption - 12VDC @ 500mA (Typ.) 30mA @12VDC (PIR only)
OTHER
⊕ External dimensions - 67 x 135 x 65 mm (W x H x D)
⊕ Weight (excluding base) - 250 g
MODEL Description
E-MEMOCAM+ Intelligent B/W PIR Camera - with Motion Detection - Includes a 16MB Memory Card for approx 2500 images
E-MEMREADER USB Memory Card Reader for use with E-MEMOCAM+
Specifications
Typical Configuration
Play-back Software
Video Input
Alarm
Out
Video Input
Ext. CCTV
Camera
Ext. CCTV
Camera
Memory Card
USB Port
B/W Pinhole
Camera
LED Status
Indication
PIR Sensor
Alarm Sensor
E-MEMREADER
Wall Mount Bracket
E-MEMOCAM+ Intelligent B/W PIR Camera - with Motion Detection
The E-MEMOCAM+ is a covert digital video recorder with removable memory card. It comprises
of a pinhole B/W CCD camera, digital video recording module with smart motion metection, all built
into a standard fully working PIR.
In addition to the built in camera, the 2 additional video inputs allow the connection of 2 additional
B/W cameras.The video output enables you to connect a monitor to the E-MEMOCAM+, allowing
the user to view video frames from a selected camera.This feature simplifies the installation process
and offers an additional monitoring feature.
The E-MEMOCAM+ automatically records events on the memory card following an alarm. The
recording can be activated by an external open contact, an internal PIR detector, the internal video
motion detection or by an external remote control unit.
Each camera is equipped with a remote control unit which can be used to arm, disarm (code-
protected), record a frame or access preset functions.
To analyse the recorded events, the memory card can be removed from the unit and images
downloaded to a PC using a Memory Card Reader (E-MEMREADER). Images are in standard JPEG
format and feature a digital watermark for authentication.
CAMERAS