User`s manual

English - 32
Teletext Feature
Displaying the Teletext Information
1. Using the CH- or CH+ button, select the channel providing the teletext
service.
2. Press the (teletext on/mix) button to activate the teletext mode.
The contents page is displayed.
3. To display the actual broadcast simultaneously with the teletext page,
press the
(teletext on/mix) button again.
4. To return the normal broadcasting mode, press the (cancel) button.
5. Press the (teletext off) button to exit from the teletext display
mode.
Note : If any broken character appears while teletext is being
viewed, make sure that the teletext language is identical
with the language in the Setup menu. If both languages are
different, select the same language with the teletext language
in the Setup menu.
Selecting a Specifi c Teletext Page
Press the number buttons on the remote control to enter the page number
directly:
1. Enter the three-digit page number listed in the contents by pressing the
corresponding numeric buttons.
The current page counter is incremented and the page is displayed.
2. If the selected page is linked with several sub-pages, the sub-pages are
displayed in sequence.
To freeze the display on a given page, press the
(hold) button. Press
the (hold) button again to resume.
Storing the Current Teletext Page into List
1. Press the (mode) button to display the listed pages.
The list appears at the bottom of the page.
2. Press the (mode) button again to switch into the list save mode.
The list is displayed with the coloured blocks.
3. Press the coloured button corresponding with the block to change into the
current page.
4. To save the current teletext page completely, Press the (store)
button.