User`s manual

English - 31
Note : It is available in PC input mode.
Adjusting the Status of PC Screen Automatically
1. Press the MENU button.
2. Press the
▲
or
▼
button to move to
Setup, then press the OK button.
3. Press the
▲
or
▼
button to move to
PC Setup, then press the OK button.
The Auto in Progress is selected.
4. Press the OK button again.
The message Auto Adjustment in Progress... is displayed. The picture
quality and position are automatically adjusted, and the picture returns to
original view about a few seconds later.
Tuning the PC Screen for Improved Quality
5. Press the
▲
or
▼
button to select
Frequency or Phase, then press the
OK button. Press the
◄
or
►
button until you reach the optimal setting,
then press the
BACK button.
Selecting the Position of PC Screen
6. Press the
▲
or
▼
button to move to
PC Position, then press the OK
button.
Select required position by pressing the
▲
/
▼
/
◄
/
▲
buttons, then press the
BACK button.
Resetting the PC Screen Settings
7. Press the
▲
or
▼
button to move to
Reset, then press the OK button.
The message for initializing is displayed.
8. Press the
◄
or
►
button to select
Yes, then press the OK button.
All settings of PC screen are replaced with the factory initial values.
Teletext Feature
Most TV stations provide written information services via teletext. The index
page of the teletext service gives you information on how to use the service. In
addition, you can select various options to suit your requirements by using the
remote control buttons.
Note : For teletext information to be displayed correctly, channel
reception must be stable. Otherwise, information may be
missing or some pages may not be displayed.
Using the Various Teletext Buttons
(teletext off)
Press to deactivate teletext service.
(teletext on/mix)
Press to activate teletext mode after selecting the channel providing the
teletext service.
Press it again to overlap the teletext with the current broadcasting screen.
(mode)
Press to select the teletext mode (LIST/FLOF).
If you press it once again, it switches into the List save mode. In the List save
mode, you can save teletext page into list using the
(store) button.
(index)
Press to display the index (contents) page at any time while you are viewing teletext.
(store)
Press to store the teletext pages.
(cancel)
Press to view the broadcast when searching for a page.
(size)
Press to display the double-size letters in the upper half of the screen. For lower
half of the screen, press it again. To display normal screen, press it once again.
(hold)
Press to hold the display on a given page if the selected page is linked with
several secondary pages which follow on automatically. To resume, press it again.
(sub-page)
Press to display the available sub-page.
(reveal)
Press to display the hidden text (answers to quiz games, for example).
To display normal screen, press it again.
(page down) / (page up)
Press to display the previous or next teletext page.
0~9 (numeric buttons)
Press to enter the three-digit page number given in the content directly.
Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics
covered on a teletext page are colour-coded and can be selected by pressing
the coloured buttons. Press one of them corresponding to the required. The
page is displayed with other coloured information that can be selected in the
same way. To display the previous or next page, press the corresponding
coloured button.