User`s manual

English - 3
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
Indicates a situation which, if not avoided, could damage the equipment or other
apparatus.
This symbol indicates dangerous voltage inside the PDP-TV that presents a risk
of electric shock or personal injury. Indicates a hazardous situation which, if not
avoided, could result in serious injury.
This symbol indicates important instructions accompanying the LCD-TV.
Read this manual carefully and make sure you understand the instructions provided.
For your safety, check what the result of each action will be. Throughout the whole
manual, pay special attention to the following instructions that indicate hazardous
situations. Indicates additional information to the user to make the user aware of
possible problems and information of any importance to help the user to understand,
to use and to maintain the installation.
The information in this document is subject to change without notice.
User Instructions
A still image displayed too long may cause permanent damage to the
LCD Panel.
Watching the LCD TV in 4:3 format for a long period of time may leave traces
of borders displayed on the left, right and center of the screen caused by the
difference of light emission on the screen.
Playing a DVD or a game console may cause similar effect to the screen. Damages
caused by the above effect are not covered by the Warranty.
Power

Plug the power cord into the correct power outlet. An unstable connection may
cause fire.

Do not use damaged power cords or plugs, or use a loose wall outlet. This may
cause electrical shock or fire.

Do never touch the power cord with wet hands. This may cause electrical shock.

Do not use multiple devices with one outlet. Overheating the outlet may cause
fire.

Do not bend or pull out the power cord using force, nor place heavy objects over
it. This may cause electrical shock or fire.

Make sure you pull out the power cord holding the plug itself. An internal
disconnection may cause fire.

When removing the product, turn off the power and pull out the plug from
the power outlet. Also make sure other devices including the antenna or
the connectors are removed from the outlets before relocating the product.
Otherwise you may suffer electrical shock or fire due to a damaged power cord.
General Safety Precautions
Installation

Keep the product away from any heating devices. Placing it close to a heating
device may cause fire.

Keep the power cord away from any heating devices. A melted coating may
cause fire or electrical shock.

Place the antenna as far away as possible from any high-voltage cables.
Touching the high voltage wiring may cause fire or electrical shock.

Do not install the product in oily, smoky or humid (or exposed to rain/water)
places or automobiles. This may cause fire.

The connection between the external antenna and the internal wiring should be
turned inside to avoid any inflow of rain. Exposing the PDP to water (rain) will
cause electrical shock or fire.

Do not use the product in humid places. Humidity will shorten the life of the
product and may cause an electrical shortage or fire.

Do not use the product in places with low temperatures (below 5°C).

Avoid installing the product in poorly ventilated places. Internal overheating may
cause an electrical shortage and fire.

Be sure not to cover the ventilator (with a table-cloth or curtain, etc.). Internal
overheating may cause an electrical shortage and fire.

Do not install the product in an unstable place or on a small stand. The product
may cause serious injury, if it falls on somebody (especially children). Install it
on an even, stable place as it is front-heavy.

Do not install the product on the floor. Someone (especially children) may trip
over it.
Cleaning

Regular clean the product (at least once a year) according to the advice of the
Customer Service. Leaving dust inside the product for an extended time may
cause fire or malfunction.

When not using the product for an extended time period, unplug the power cord.
Dust over or inside the PDP may cause electrical shock, leakage or even fire
from possible heat generation.

When cleaning the product, unplug the power cord and use only a soft, dry cloth.
Do not use chemicals like wax, benzene, alcohol, thinners, aroma, lubricator or
cleanser.

Do not wipe over the screen with your nails or any sharp-edged objects. This will
scratch the surface.