User`s manual
English - 23
Setting the Picture
Selecting the Picture Mode
You can select the picture mode which best corresponds to your viewing
requirements.
1. Press the MENU button.
2. Press the
▲
or
▼
button to move to
Picture, then press the OK button.
The Picture Mode is selected.
3. Press the OK button again.
4. Press the
▲
or
▼
button to select required picture mode as followings,
then press the
▲
or
▼
button.
Custom – Dynamic – Standard – Movie – Mild
Note : You can select the modes by simply pressing the PICTURE
MODE button on the remote control.
Picture
Picture Mode Standard ►
Custom Picture
Colour Tone Normal
Size Normal
Move
OK
Enter
Back
Return
Picture
Picture Mode Standard
Custom Picture
Colour Tone Normal
Size Normal
Adjust
Enter
Back
Return
Custom
Dynamic
Standard
Movie
Mild
Customizing the Picture Settings
This TV has several setting options that allow you to control the picture quality.
1. Press the MENU button.
2. Press the
▲
or
▼
button to move to
Picture, then press the OK button.
3. Press the
▲
or
▼
button to move to Custom Picture, then press the
OK
button.
4. Press the
▲
or
▼
button to select required option as followings, then press
the
OK button.
Contrast – Brightness – Colour – Sharpness – Tint (NTSC only)
The horizontal bar is displayed. Press the
◄
or
►
button until you reach
the optimal setting. To select other options, press the
▲
or
▼
button.
5. Press the BACK button to return to the previous menu.
Notes
:
If you make any changes to the options, the picture mode is
automatically switched to Custom.
Tint is not available in the PAL signal standard.
Custom Picture
Contrast
80
Brightness
50
Colour
50
Sharpness
50
Tint
50
Move
OK
Enter
Back
Return
Contrast
80
Picture
Picture Mode Standard
Custom Picture ►
Colour Tone Normal
Size Normal
Move
OK
Enter
Back
Return