User`s manual

English - 19
Watching TV
Switching On and Off
1. Connect the power cord of the TV to a wall outlet.
2. Press the button on the rear of the TV.
The standby indicator lights up.
3. Press the STANDBY button on the remote control (or on the rear of the
TV) to switch the TV on.
Note : To place the TV in standby mode, press the STANDBY button
again on the remote control (or on the rear of the TV).
It can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
4. To switch the TV off, press the button on the rear of the TV.
Note : Do not leave the TV in standby mode for too long (on holiday,
for example). Turn the TV off by pressing the button on the
rear of the TV. It is best to disconnect the power cord.
Viewing the Input Source
Once you have connected up your various audio and video systems, you can view
different sources by selecting the appropriate input.
1. Press the TV/AV button.
2. Press the
▲
or
▼
button to select required input source as followings.
TV – AV1 – AV2 – AV3 – S-Video – Component – PC
3. Press the OK button.
It is switched to selected source.
Note : You can select TV, AV1, or AV2 by simply pressing the TV, AV1,
or AV2 button on the remote control.
Changing Channels
Using the CH- / CH+ buttons.
The TV changes channels in sequence. You can select all channels that the TV
has memorized.
Note : You can not select channels that were either erased or not
memorized.
Using the numeric (0~9) buttons.
Press the numeric buttons to quickly tune to any channel.
Note : You can select all channels that were either erased or not
memorized. For example, to select channel 27, press the
2, then 7. The TV will change channels when you press the
second number. To change to single-digit channels (0~9)
faster, press the 0 before the single digit. (For channel 4,
press the 0, then 4.)
P 2 ABC
NICAM Stereo
Picture Dynamic
Sound Custom
Sound Effect Ess
Clock 12:00 AM
Sleep 117 Min
Displaying Information
You can display the channel information and setting status you selected by
pressing the
RECALL
button. Press it again to exit.
Choosing Your Language
When you start using your TV for the fi rst time, you must select the language
which will be used for displaying menus and indications.
1. Press the MENU button.
2. Press the
▲
or
▼
button to move to
Setup, then press the OK button.
The Language is selected.
3. Press the OK button again.
4. Press the
◄
or
►
button to select required language.
Setup
Language English ►
Time
PC Setup
Move
OK
Enter
Back
Return