User`s manual
English - 11
Attaching the Stand-Base
Inserting the Batteries into the Remote Control
You must insert or replace the batteries in the remote control when you:
+ Purchase the TV
+ Find that the remote control is no longer operating correctly
1. Remove the cover on the rear of the remote control by pressing the symbol (
)
downwards and then pulling firmly to remove it.
2. Insert two AAA size 1.5V batteries ensuring that the “+” and “-” ends of the batteries are
correctly aligned.
3. Replace the cover.
Note : Do not mix battery types, i.e. alkaline and manganese.
1. Attach the LCD to the stand-base.
2. Firmly secure the stand-base and the LCD by using the 4 screws.
Note : Firmly secure the stand-base for the LCD before moving it, as the stand-
base may fall and could cause serious injury.