Technical data

The Hydromatic SHEFSO/ 100
submersible pumps are specifically
designed to meet the demands of
residential high head septic tank eflluent
or sump applications. The 2 inch NPT
discharge pumps feature an energy-
efficient l/2 or 1 horsepower motor,
automatic and manual versions, and ti
wide variety ofvoltages including dual
voltage 208-230 volt single and three
phase. The SHEF50 can handle capaci-
ties up to 63 gallons per minute and
heads to 63 feet. The SHEFIOO can
handle capacities up to 88 gallons per
minute ahd heads to 90 feet.
The SHEF50/100 features a heavy-
,“‘(u,ty cast iron construction that provides
/’
-ability for a long service life, as well
dissipating heat from the motor for
cooler operation. All fasteners are
stainless steel for corrosion resistance.
The pump’s semi-operi, non-clog design
impeller passes 3/4” (spherical) solids
allowing the motor to run cool and
and is made from a super tough
quiet. The oil filled design also
engineered pfastic that provides the
provides permanent lubrication of the
highest level of corrosion resistance tid
shaft bearings, minimizing mainte-
the toughness to withstand the impact
nance and extending the service life of
of solid materials. The impeller,
the pump. The oil filled rnotor design
molded to a bronze insert, also fedtires
allows for even heat dissipation. On
ptimp-out vanes to preclude mat&al
‘.:’ Single phase models the windings
Corn building up around the shaft tid feature a built-in thermal overload that
seal. The pump’s unique (patent
Wets automatically.
pending) no+clog desigri baseplate hti
an electrost&c& aDdlied doltretter
‘. ’ Automatic models feature an easily
coating for corroio~Lresisthc~ and
adjustable wide-angle floa.t switch, -
provides a strainer-free inlet capable of
incorporating a unique piggyback plug
passing two (2), 3/4” (spherical) solids
arrangement. This plug a.llows for
simultaneously. The inlet area is raised
simple conversion to manual operation
off the bottom of the septic tank or
by simply removing the switch plug
sump basin by the pump’s 2” high legs
and inserting the pump’s motor plug
constrtxcted of Engineeted Thetioplas-
iilto the electrical outlet. This feature
tic material for maximum cotiosion G,.:. provides an easy way of periodically
resistance.
cycling the pump to ensure it is
The SHEFSO/lOO’s oil filled motor operating properly.
provides superior cooling charactetistics, ”
.:
SHEF50/ 1.160 TYPICAL .,lNSTALlATlON
:,:*:, .,~ _. 2; . . .
, .~. T _._._ ..- .,.. -A,.
-:
.z .‘. “Y
1
n
.-..
w
.I
‘u