Technical data

,~Conversion from Flood Oil to Regreaseable
2.
NOTE: Make sure that pipe threads are clean
and apply thread sealant to plugs and fittings.
NOTE: LXX regreaseabje power end requires a
changeout of the bearing housing and bearing
clamp ring. This housing provides a grease
path to the bearings.
3.
4.
1.
Plug inboard oil return in bearing frame.
5.
STX: Use epoxy, keep drilled hole clear.
MTX, LTX, XLT-X, X17: Use set screw, install
from adapter side, bottom in hole.
Plug outboard oil return slot in bearing housing,
keep through holes clear. (does not apply to LTX)
Replace both bearings with single shield type.
Refer to Assembly Section for installation
guidelines.(Ref. Bearing Chart Table 11)
Install grease fittings at top, inboard and top,
outboard l/4* NPT connections in bearing frame
(plugged with 408H allen head plug).
Remove 2 (408H) Allen head plugs from bottom side
of frame prior to greasing bearings.
Reinstall hex
head plugs (113) after bearings have been greased.
Grease Lube
82