Technical data

!
196. REMOVAL OF DYNAMIC SEAL...
3. Remove socket head cap screws (266)
(Fig. 33).
4. Remove stuffing box cover (184) and gasket
(264) -
5. Remove repeller (262) from backplate (444).
Fig. 33
1. Remove stud nuts (370H).
2. Remove dynamic seal assembly (Fig. 32).
. ..- .- - __.“-_ M’ IV’
20. REMOVE FRAME ADAPTER - MTX, LTX, XLT-X,
x17
1. Remove dowel pins (4698), and bolts (3706).
2. Remove frame adapter (108) (Fig. 34).
3. Remove and discard gasket (3600). Replace
with new gasket during reassembly.
v 3708
Fig. 34
21. Remove inboard labyrinth oil seal (333A), it is an
O-Ring fit into the bearing frame (228A) for STX,
frame adapter (108) for MTX, LTX, XL.T-X and
Xl 7. Remove O-rings (497H), (497J) if necessary
(Fig. 35).
.:“;
NOTE: Labyrinth oil seal o-rings (497H, .I) are
,‘part of 3136 maintenance kits or can be
obtained sepamtely