Technical data

I
NAMEPLATE INFORMATION
E!!**I !%TA%- 1-1
k
CAUTION: AFTER STARTING w t4o~ OPERATE AGAINST aosm VALVE
5
Fig. 1
Every pump has two Goulds nameplates that provide
information about the pump. The tags are located on
the casing and bearing frame.
Pump Casing Tag - provides information about the
pump’s hydraulic characteristics. Note the format of
the pump size: Discharge x Suction - Nominal
maximum Impeller Diameter in inches.
(Example: 2x3-6)(Fig. 1).
Bearing Frame Tag - provides information on the
lubrication system used (Fig. 2).
When ordering spare parts you will need to identify
pump model, size, serial number, and the item
number of required parts. Information can be taken
from the pump casing tag. Item numbers can be
found in this manual. .
Fig. 2
10
_ ,* ‘.
.,_^ .._ .-.. .-_-. .‘----.--.-~