Technical data

COUNT
WEIGHT
TENSILE STRENGTH
(Grab Method)
TEAR STRENGTH
(Tongue Method)
MULLEN BURST
HERCUSHIELD 30Q
DATA SHEET
Nominal 10 X 5 tapes/inch
4.2 oz per square yard (141 gsm) + 10%
Warp - 135 Ibs ASTM D75 1 (Meth.A)
Weft -
95 Ibs
Warp - 38 Ibs ASTM D75 1 (Meth.B)
Weft - 35 lbs
230 psi
The above physical test results are representative data collected from a number of production
runs. Results for an individual roll (based on at least three specimens) may vary from the
average by f: 1%
COATING THICKNESS 1.2 mil / 2.0 mil average
74 gsm average
SCRIM TYPE
COLOR
STANDARD ROLL
l
MINIMUM RUNS
Special runs of standard colors - 17,000 lin yards
Special runs of non-standard colors - 17,000 lin yards
f---l
H300
Black tapes
Black or colored coatings available as ordered
Single rolls with a nominal length of 1000 linear yards, on 4”
I.D. core with the ends sewn closed. Actual lengths will
depend on the best utilization of the input roll while
eliminating coater splices.
Due to the elongation of certain materials during winding, roll
lengths will vary -t- 1%.