Technical data

In-Line Plastics, Inc. was
established by industry leaders
/& provide a full range of polyeth-
lne liner systems.
In-Line Plastics, Inc. employs
personnel with decades of
experience in custom-fabricating
and installing polyethylene liners
to any application or complexity.
No challenge is too great! Call
your In-Line representative today
to discuss your requirements.
Geomembranes
l Co-Extruded and Mono-Layer,
6 mil.-100 mil.
l Smooth or textured.
l Only premium HDPE and
LLDPE resins are used in
liner manufacture. Excellent
resistance to:
l Chemicals
l Environmental stress crack
l Puncture & tear
,.n; l Ultra-violet
stringent quality control of
resin and liner during
manufacture.
l Full Q.C. documentation
provided.
Installation
l Experienced personnel.
l Hazardous Material trained.
l State-of-the-art seaming and
testing equipment.
l Fully documented installation
including:
l Daily reports
l Destructive and non-
destructive seam test
results.
l As-built drawings.
l Committed to meet project
schedules.
Pre-Fabrication
:/F-‘\
to 3 day lead times.
Engineered-to-fit.
l Sizes up to one acre.
0 Cost effective.
Self-installed.
Secondary Containment Systems
Tank Liners and Retrofits
Lagoon Liners and Caps
Landfill Liners and Caps
Pond Liners
Vapor Barriers
Remediation Liners and Covers
Oilfield Liners
Daily and Temporary Landfill Covers
Decontamination Pads
Fish Pond Liners
Cisterns and Tanks
In-Line’s Welding Processes
In-Line’s wedge process produces continuously welded seams with
total integrity and perfect closure between overlapping sections of
Herculine”“.
Use the twin-weld seam when pressure-testing of the joint is needed.
Mono-welded joints are also available providing strength and reliability. For
extrusion weld applications, use In-Line’s welding rod, made of the same
material as Herculine’“, for total material compatibility and stronger welds.
FUSION WELD ”
FUSION WELD
TWIN-WELD SEAM
MONO-WELD SEAM
EXTRUSION SEAM