Technical data

Table 2.1 lists %he major equipment components pertaining to the Biocell.
Component
20-mil HDPE liner
Table 2.1
Manufacturer
In-Line Plastics
Phone
[phone]
SUP-P
Aurora Pumps, Inc.
[phone]
Transfer Pump
Sprinklers
20,000-gallon Tank
Goulds Pumps, Inc.
Rain Bircl
Baker Tanks
[phone]
[phone]
[phone]
4
Sump Pump
The function of the sump pump is to transfer water collected in the sump into the 20,000-
gallon Baker tank The pump is manually operated by a control box located outside the
Biocell. The submersible pump is manufactured by Aurora Pump. See attached manual in
Appendix A for specifications.
Baker Tank
The function of the 20,OOOgallon Baker tank is to store rain water from the Biocell for
moisture control or for subsequent treatment at the adjacent groundwater treahnent plant.
Water is pumped into me top of the tank from the sump pump and out via the transfer
pump. To transfer water to the groundwater treatment plant, water is pumped by a 2-inch
pump through flexible hose into the groundwater treatment plant wet well.
Transfer Pump
The function of the transfer pump is to disperse water onto the Biocell for moisture control.
The seal water for the Goulds pump is fed by water diverted from the Baker tank
The flow
rate for the seal water is 0.5 gpm at 20 psi.
The pump is started by a control box located at
the electrical panel. See attached manual in Appendix A for specifications.
Sprinkler System
A 2-inch PVC line delivers the water from the transfer pump to the Biocell.
There are four
mobile sprinkler stands located on the Biocell. These sprinkler stands have l-inch flexible
hose attached so that the stands can be relocated during loading, tilling and removal
activities. The sprinklers are manufac%ured by Ram Bird. See the attached manual in
Appendix A for specifications.
O&M Manual 2-l
QHlU/16032