Technical data
Table Of Contents
- Introduction
- Getting Started
- Flip Closed
- Flip Open Guidelines
- Phone
- Contacts
- Messaging
- Calendar
- WAP Services
- Getting started with e-mail and WAP
- E-mail set up
- Automatically set up service provider and e-mail
- Manually set up service provider and e-mail
- Manually set up a service provider
- Manually set up e-mail
- Sending an e-mail for the first time
- Using e-mail with several configurations installed
- Setting up WAP Services
- WAP Profiles
- Automatically set up WAP
- Manually set up WAP
- Using WAP for the first time
- Using WAP with several configurations installed
- Locating settings in Windows 95 or 98
- Trusted Certificates
- Homepage
- Extras
- R380 Communications Suite
- Troubleshooting
- Important Information
- Index

32 Flip Closed
Receiving and answering a call
When you receive a call, the R380e rings, the indicator light on the
top blinks green rapidly and the display shows
Answer?.
To answer a call:
1.
Press to answer the call.
2.
When the call is finished, press .
Rejecting a call
To reject a call:
•
Press when the R380e rings. The call is rejected and a busy
tone is sent to the caller. All calls can be rejected in this way.
The display shows
Busy tone sent
. The caller hears a busy tone if
this is supported by the caller’s subscription. If
Divert when busy
is
on, the call is diverted to the number you have specified. See
“Divert calls” on page 76.
Note: A data call cannot be answered as a voice call. Data
information must be downloaded to a data compatible machine or
service. Such a call can, however, be rejected.
Fax calls
Fax calls are not supported, however they can be forwarded to
another number such as the office fax number, so it is important that
you set the fax divert calls setting. See “Divert calls” on page 76 for
more information.
Note: Fax calls are not received by your R380e and no indication is
provided.
When a call is in progress
Changing the volume
During a call the volume can be adjusted with the use of the slider on
the side of the R380e. Slide up to increase the volume and down to
decrease the volume.
Muting the microphone
To disconnect the microphone during a call, press and hold down
. Release to resume the conversation.
To disconnect the microphone during a call for a period of time
either:
•
press and hold down whilst moving the volume slider
downwards, release , the call remains muted. Press
to resume the conversation.
or
Incoming call
Answer?
+465554567890
Ericsson John