Technical data
Table Of Contents
- Introduction
- Getting Started
- Flip Closed
- Flip Open Guidelines
- Phone
- Contacts
- Messaging
- Calendar
- WAP Services
- Getting started with e-mail and WAP
- E-mail set up
- Automatically set up service provider and e-mail
- Manually set up service provider and e-mail
- Manually set up a service provider
- Manually set up e-mail
- Sending an e-mail for the first time
- Using e-mail with several configurations installed
- Setting up WAP Services
- WAP Profiles
- Automatically set up WAP
- Manually set up WAP
- Using WAP for the first time
- Using WAP with several configurations installed
- Locating settings in Windows 95 or 98
- Trusted Certificates
- Homepage
- Extras
- R380 Communications Suite
- Troubleshooting
- Important Information
- Index
R380 Communications Suite 193
To run the Setup manually, if needed:
1.
Select Run from the Start menu.
2.
Enter ‘D:\Start.exe’ where D: is the letter of your CD-ROM drive
or select
Browse
and navigate to the ‘Start.exe’ file on the R380
Communications Suite CD-ROM. Select
OK
to start the
installation.
or
•
Open Windows Explorer and select your CD-ROM drive. Scroll
to, and double-click, the ‘Start.exe’ file.
To install Lotus Organizer 5.0 from the CD-ROM:
1.
Run the R380 Communications Suite CD-ROM automatically or
manually as above.
2.
Select the desired language and click
OK
.
3.
Select
Install Lotus Organizer® 5.0
.
4.
Read the information and click
Install now!
.
5.
Follow the on-screen instructions to complete the installation.
Note: The English version of the Lotus Organizer manual can be
found on the R380 Communications Suite CD-ROM at
D:\Utilities\Lotus\English\Pdf\Org_5.pdf.
Preparing your R380e
Once you have installed the R380 Communications Suite you can
now connect your R380e to your computer. Your R380e has a built-in
serial port for communication.
Serial Connection
1.
Locate the serial port on your computer, this is usually found at
the back of your computer.