Technical data

182 Extras
To create a new WAP profile:
1.
Select
WAP profiles
from the list displayed in the WAP services
settings view. The WAP profiles view appears in the display.
2.
Tap and select
New WAP Profile
. The New WAP profile view
appears in the display.
3.
Enter the required information.
•
Name:
Enter a name for this profile.
•
Service provider:
Tap the service provider field and select which
service provider to use for this profile. If you would like to
select a service provider whenever you use this profile, choose
[Always ask]
•
Gateway:
Enter the IP address for the WAP gateway.
•
Gateway username:
Enter the your username for the gateway.
•
Gateway password:
Enter your password.
•
Confirm password:
Re-enter your password for confirmation.
•
Security:
Select whether or not you want the Security on. If
On
is selected, all data sent to and from the gateway will be
encrypted. Default is
Off
.
•
Connection mode
: Select the connection type: either
Connectionless
or
Connection oriented
.
4.
To set the WAP profile as the default profile, tap and select
Set
as default
.
5.
Tap to save the new profile. The display returns to the WAP
profile view.
Note: Although supported, the
Username
and
Password
are not always
necessary and can be left empty.
To edit, set as default, or delete a profile:
1.
From within the
Extras
tab, tap
System
and choose
Preferences and
settings
.
2.
Select
WAP Services
from the list, and then select
WAP profiles
from
the list in the WAP services settings view.