Technical data

178 Extras
To initialize or re-initialize the RSA SecurID:
•
Select
Initialise RSA SecurID
from the list displayed in the One-time
passcodes view.
If no previous initialisation has been performed, the Initialise RSA
SecurID view appears in the display. Select the
User ID:
and
Activation licence:
sections and enter your user identification and
the seed data in their respective sections, then tap . If any of
the entered values cannot be validated a warning message appears
stating which value was incorrect. Otherwise, an information view
appears informing you that “RSA SecurID has been successfully
initialised”. Select
OK
to return to the One-time passcodes view.
If initialisation has already been performed, a Re-Initialise
confirmation message appears stating that the “Current
initialisation data will be lost” and asking “Are you sure?”. Select
No
if you want to retain the previous initialisation and return to the
One-time passcodes view. Otherwise, select
Yes
. The Initialise
RSA SecurID view appears in the display. Change the
initialisation data as described above.
To initialize or re-initialize Safeword:
1.
Select
Initialise Safeword
from the list displayed in the One-time
passcodes view. The Initialise Safeword view appears in the
display.
2.
Select
Serial number:
and
Authorisation code:,
enter the required data
and then tap . If there is an incorrect value in any of the
sections a warning view appears stating which value is incorrect.
Otherwise, a second Initialise safeword view appears in the
display.
3.
Select
Key phrase:
, enter the key phrase and then tap . If the key
phrase is incorrect a warning message appears in the display.
Otherwise, a third Initialise Safeword view appears in the display.
4.
Select
User ID:
and enter your user identification.
5.
Select
Choose PIN:
and enter a PIN.
6.
Select
Confirm PIN:
, then enter the PIN that was entered in the
previous step and then tap . If the PIN’s do not match or the
user ID is incorrect a warning message appears in the display.
Otherwise, you will see a message confirming that the Safeword
has been successfully initialised. Select
OK
to return to the One-
time passcodes view. Change Safeword PIN appears in the
display.