Technical data
Table Of Contents
- Introduction
- Getting Started
- Flip Closed
- Flip Open Guidelines
- Phone
- Contacts
- Messaging
- Calendar
- WAP Services
- Getting started with e-mail and WAP
- E-mail set up
- Automatically set up service provider and e-mail
- Manually set up service provider and e-mail
- Manually set up a service provider
- Manually set up e-mail
- Sending an e-mail for the first time
- Using e-mail with several configurations installed
- Setting up WAP Services
- WAP Profiles
- Automatically set up WAP
- Manually set up WAP
- Using WAP for the first time
- Using WAP with several configurations installed
- Locating settings in Windows 95 or 98
- Trusted Certificates
- Homepage
- Extras
- R380 Communications Suite
- Troubleshooting
- Important Information
- Index

170 Extras
General settings
To change the system settings:
1.
Select General settings from the list displayed in the
Preferences and settings view. The General settings view appears
in the display.
To change the backlight settings:
1.
Select
Backlight
from the list displayed in the General settings
view. The Backlight view appears in the display.
2.
To change the mode of the backlight hand held or backlight hands
free display, select
Back light hand held:
or
Back light hands free:
and
then select
Off
,
On
or
Automatic
.
Automatic -
back light is illuminated if an event (i.e. an alert sound,
message to be acknowledged, etc.), a key press, at power on or the
volume slider is pressed up and down or vice versa. The
illumination is turned off after 10 seconds of inactivity or 1 minute
if the volume slider was used.
3.
Tap to implement and save the new settings. The display
returns to the General settings view.
To change the display settings:
1.
Select
Display
from the list displayed in the General settings view.
The Display view appears in the display.
2.
To adjust the contrast, select
Contrast:
and use the left and right
scroll arrows to select the required contrast level: 1 corresponds to
the lightest contrast and 9 to the darkest. The default level is 5.
3.
To change the screen orientation, select
Screen orientation:
and then
select
Open flip to left
or
Open flip to right
.
4.
To change the mode of the screen saver, select
Screen saver hand
held:
and then select
Off
or
Automatic
(LCD and backlight (if on)
turned off after two minutes of inactivity).
General settings
Backlight
Display
Input
Language, time and date formats
Data connection
Confirmations