Technical data
Table Of Contents
- Introduction
- Getting Started
- Flip Closed
- Flip Open Guidelines
- Phone
- Contacts
- Messaging
- Calendar
- WAP Services
- Getting started with e-mail and WAP
- E-mail set up
- Automatically set up service provider and e-mail
- Manually set up service provider and e-mail
- Manually set up a service provider
- Manually set up e-mail
- Sending an e-mail for the first time
- Using e-mail with several configurations installed
- Setting up WAP Services
- WAP Profiles
- Automatically set up WAP
- Manually set up WAP
- Using WAP for the first time
- Using WAP with several configurations installed
- Locating settings in Windows 95 or 98
- Trusted Certificates
- Homepage
- Extras
- R380 Communications Suite
- Troubleshooting
- Important Information
- Index
150 Getting started with e-mail and WAP
Note: You will need to obtain the items marked with a * from your
service provider.
To create a new profile:
1.
From within the
Extras
tab, tap
System
and choose
Preferences and
settings
.
2.
Select
WAP Services
from the list.
3.
Select
WAP profiles
from the list in the WAP services settings view.
The WAP profiles view is displayed. Notice that the profile that is
set as default has
(Default)
after its name
4.
Tap and select
New WAP profile
. The New WAP profile view is
displayed.
This image has been adjusted to show all the new WAP profile
settings. In reality, you will need to use the scroll bar to see all
these settings.
Security* Set to ON if the WAP site you are
accessing requires a trusted
certificate. See page 155 for more
details.
Connection* Set this to Connectionless unless
your service provider has advised
you to select the alternative setting
of Connection oriented.
WAP profiles
Banking
Ericsson (Default)
Profile 1
New WAP profile
Name:
Service provider:
Gateway:
Gateway username:
Gateway password:
Confirm password:
Security:
Connection mode:
<Enter name>
<[Always ask]>
<Enter IP number>
<Enter username>
<Enter password>
<Enter password>
<Off>
<Connection oriented>