Technical data
Table Of Contents
- Introduction
- Getting Started
- Flip Closed
- Flip Open Guidelines
- Phone
- Contacts
- Messaging
- Calendar
- WAP Services
- Getting started with e-mail and WAP
- E-mail set up
- Automatically set up service provider and e-mail
- Manually set up service provider and e-mail
- Manually set up a service provider
- Manually set up e-mail
- Sending an e-mail for the first time
- Using e-mail with several configurations installed
- Setting up WAP Services
- WAP Profiles
- Automatically set up WAP
- Manually set up WAP
- Using WAP for the first time
- Using WAP with several configurations installed
- Locating settings in Windows 95 or 98
- Trusted Certificates
- Homepage
- Extras
- R380 Communications Suite
- Troubleshooting
- Important Information
- Index
144 Getting started with e-mail and WAP
To manually set up service provider:
1.
With the flip open, tap
Extras
,
System
,
Preferences and settings
and
Service Providers
.
2.
Tap and select
New service provider
.
3.
Use the information given in the previous table (page 141) to
complete the form. You will have to use the scroll bar to see all the
items.
Additional fields you need to fill in are:
4.
Once all the details are entered, tap .
You have successfully set up your service provider, the next step is to
set up an e-mail account.
Manually set up a service provider
Name A name which identifies the service provider
when you connect to e-mail or WAP. You can
enter anything, e.g. Acme Internet, WAP SP,
BigCorp
Note: The R380e only allows the setting to saved
if a unique name has been entered.
Confirm
Password
A check to make sure that you have entered the
password correctly
New service provider
Name:
Tel. number:
Bearer capability:
Username:
Password:
Confirm password:
<Enter name>
<Enter phone number>
<Enter password>
<Enter password>
<Analogue>
<Enter username>