Operating instructions

2
TABLE OF CONTENTS
Page:
1 GENERAL 3
1.1 MANUFACTURER’S ADDRESS 3
1.2 APPLICATION 4
1.3 SCOPE OF DELIVERY 4
1.4 OPTIONAL EQUIPMENT 4
1.5 TECHNICAL DATA 6
1.5.1 SPECIFICATION PLATE 6
2
SAFETY INSTRUCTIONS
7
3
MACHINE SETUP AND OPERATION
7
3.1 DISCHARGE CONVEYOR ASSEMBLY 8
3.1.1 RETRACTION OF DISCHARGE CONVEYOR 9
3.2 TRACTOR PTO SHAFT DRIVE (RCA 380) 9
3.3 STARTING UP 10
3.4 TRANSPORT POSITION OF THE MACHINE 11
4 OPERATING THE FIREWOOD PROCESSOR 11
4.1 NOISE 11
4.2 LOG FEEDING 11
4.3 SAWING 13
4.3.1 ADJUSTING THE WOOD LENGTH 13
4.4 SPLITTING 13
4.4.1 ADJUSTING THE HEIGHT OF THE SPLITTING WEDGE 14
4.4.2 MACHINE COVER WITH SAFETY SWITCH 14
4.5 DISCHARGE CONVEYOR 15
Chapter:
5 MAINTENANCE AND REPAIR 16
5.1 CHAIN REPLACEMENT 16
5.2 CHAIN TENSIONING 17
5.3 SPLITTING WEDGE REPLACEMENT 17
5.4 HYDRAULIC SYSTEM OIL CHANGE 17
5.5 OIL FILTER MAINTENANCE 18
5.6 LUBRICATION OF THE ANGLE REDUCTION GEAR (RCA 380) 18
5.7 CHAIN LUBRICATION 17
5.8 TROUBLESHOOTING 19
5.9 MAINTENANCE PLAN 20
5.10 CUTTING CHAIN BELT REPLACEMENT 22
WARRANTY SHEET 28
5.11 INDICATIONS OF IMPROPER USE 24
5.12 SUPPLIES 24
5.13 SPARE PARTS ORDERING 24
4.4.3 »START-STOP« SWITCH (RCA 380 E) 15
4.4.4 MAIN SWITCH (RCA 380 E) 15
5.10.1 BELT TENSIONING 23