Instruction manual

2-12 1. Operation of ZM-300 Main Menu

3-1. CREC Menu Screen

When the [CREC Menu] switch on the “Card Menu” screen is pressed, the following “CREC

Menu” screen appears. This screen is used to transfer screen data between the ZM-300

series and a memory card. The procedure for transferring data is described below.

1. Connecting the ZM-1REC

Check on the “Port Selection” field that the ZM-1REC cable is connected to a modular

jack port.

• MJ1: Connect the ZM-1REC to the MJ1 port. Normally MJ1

is selected.

• MJ2: Connect the ZM-1REC to the MJ2 port. Only when

[Memory Card] is selected for [Modular Jack 2], “MJ2”

is indicated in the “Port Selection” field.

2. Mounting the Memory Card

Insert a memory card into the card recorder (ZM-1REC).

Modular Jack

MJ1

CREC Menu

Transfer

Start

Cancel

Return

Screen Data Font Data

I/F Driver Sys. Program

Data Selection

Port Selection

Display

Card

Modular Jack

MJ1

Port Selection