Instruction manual

1-56 22. Expansion Memory (ZM-300SM)
Installation method
Install ZM-300SM to the connector for expansion memory (MEMORY) on the rear side of
the ZM-300 series in the following procedure.
1. Turn off the power.
2. Adjust the direction of the display, and pull out the cover, pressing the part as shown
in the figure.
3. Put the slits of ZM-300EM with the projected parts of the display, and fix ZM-300EM into
the rear side of the display by pressing the connector part.
4. Insert the removed cover until you hear clicking sound.
5. Make sure ZM-300SM is appropriately installed in the [Main Menu] screen of the
display. When ZM-300SM is appropriately installed. See page 1-57 "Main Menu"
screen.
ZM-350/360 series ZM-370/380 series
24VDC
- +
LAN
CN1
MJ1
MJ2
PRINTER
CF
CN5
MEMORY
CN6
[Rear side]
100-240VAC
L N

LAN CN1
MJ1 MJ2 PRINTER
CF
CN5
MEMORY
CN6
[Rear side]
MEMORY
MEMORY
CN6
Pull out the cover, pressing the part.
Top
MEMORY
CN6
MEMORY
CN6
MEMORY
CN6
Put the slits (hole)
of ZM-300EM on
the projected parts.

Projected
parts
Press the connector part.
Top