Instruction manual

1
17. Expansion I/O Module (ZM-322ME) 1-41
Hardware Specifications
17. Expansion I/O Module
(ZM-322ME)
ZM-322ME is an expansion I/O module, with 16 input pins and 16 output pins, that can be externally
equipped with the models in the table below through a modular jack. Using ZM-322ME, you can save
the power by wiring the sensor actuator around the ZM-series display to the PLC through the display
itself. You can set an I/O address from the PLC with the screen editing software, ZM-71SE.
Handling precautions
• Since the ZM-322ME has a communication module, such as a link module, it cannot be
used for high speed or emergency operation or operation (emergency stop).
• ZM-322M, a built-in type expansion I/O module, cannot be used with the ZM-72/82
series. Choose one of them for your purpose. ZM-322M cannot be used with the
ZM-300 or ZM-42/43/52 series, either.
Applicable model (LCD control terminal model name)
ZM-300 Series
ZM-350 Series
ZM-360 Series
ZM-370 Series
ZM-380 Series
ZM-352D
ZM-362S, ZM-362SA
ZM-371T, ZM-371TA, ZM-371S, ZM-371SA, ZM-371TL
ZM-373TA, ZM-373TL
ZM-381S, ZM-381SA
ZM-383S, ZM-383SA
ZM-42D, ZM-42L
ZM-43T, ZM-43D, ZM-43L
ZM-52D
ZM-72T, ZM-72TS, ZM-72D
ZM-82T
ZM-42 Series
ZM-43 Series
ZM-52 Series
ZM-72 Series
ZM-82 Series
ZM-372T, ZM-372TA, ZM-372S, ZM-372SA
ZM-382S, ZM-382SA