Instruction manual

1
15. Printer Connection (PRINTER) 1-37
Hardware Specifications
15. Printer Connection
(PRINTER)
When the ZM-300 series is connected to a printer, a screen hard copy, data sheet or
sampling data can be printed. To connect a printer with parallel interface, insert the cable
into the printer connector (PRINTER); to connect a printer with serial interface, insert the
cable into a modular jack (MJ1/MJ2).
Printer Connector (PRINTER)
• This is the printer connector for parallel interface.
- For ZM-350/360: - For ZM-370/380:
• The printer interface pins correspond to signals as given below.
CAUTION
Be sure to turn the printer off when the ZM-300 unit is turned off.
Bottom View Bottom View
PRINTER (half-pitch 20-pin) Pin No. Signal Name Contents
1 STB# Strobe
2 PD0 Data 0
3 PD1 Data 1
4 PD2 Data 2
5 PD3 Data 3
6 PD4 Data 4
7 PD5 Data 5
8 PD6 Data 6
9 PD7 Data 7
10 GND
11 BUSY# Busy
12 GND
13 SELECT
14 INTP# INP PROME#
15 PFAT# FAULT#
16 GND
17 GND
18 P+5V PRN+5
19 GND
20 GND
11 20
110