Instruction manual

1
8. Power Supply Cable Connection 1-21
Hardware Specifications
8. Power Supply Cable
Connection
Power Supply Cable Connection
• Connect the power supply cable to the terminal on the backside of the unit.
- ZM-350/360 - ZM-370/380
• When connecting the power supply cable, tighten the terminal screws to the following
torque.
• The power source must be within the allowable voltage fluctuation.
• Use a power source with low noise between the cables or between the ground and the
cable.
• Use as thick a power supply cable as possible to minimize drop in voltage.
DANGER
Electric shock hazard
Shut the power off before connecting the power supply cable.
24 VDC
24VDC
- +
LAN
CN1
MJ1
MJ2
PRINTER
CF
CN5
MEMORY
CN6
LN ＋ −
24VDC
100-240VAC
L N

LAN
CN1
MJ1 MJ2
PRINTER
CF
CN5
MEMORY
CN6

See operating or maintenance
instruction for type of battery
to be used.


Battery replacement.

Power supply
24 VDC ± 10%
Grounding
24 VDC specification
100-240 VAC specification
Power supply
100-240 VAC
Grounding
Power supply
24 VDC ± 10%
Grounding
24 VDC specification
Terminal Screw
Model
Screw Size Tightening Torque Crimp-style Terminal (Unit: mm)
ZM-350/360 M3.5 0.5 N•m
ZM-370/380 M4 0.5 N•m
7.1 MAX 7.1 MAX
7.9 MAX 7.0 MAX