Instruction manual

5-32 3. OMRON PLC
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.
SYSMAC C
SYSMAC CV
SYSMAC CS1, SYSMAC CS1 DNA
Memory TYPE Remarks
DM (data memory) 0
CH (input/output relay) 1
HR (holding relay) 2
LR (latch relay) 3
AR (alarm relay) 4
T (timer/current value) 5
C (counter/current value) 6
EMn (extensional data memory) 7 *1
TU (timer/contact) 9 Read only
CU (counter/contact) 10 Read only
Memory TYPE Remarks
DM (data memory) 0
CH (input/output relay) 1
AR (alarm relay) 4
T (timer/current value) 5
C (counter/current value) 6 *1
EMn (extensional data memory) 7 Read only
TU (timer/contact) 9 Read only
CU (counter/contact) 10
Memory TYPE Remarks
DM (data memory) 0
CH (input/output relay) 1
H (holding relay) 2
A(alarm relay) 4
T (timer/current value) 5
C (counter/current value) 6
EMn (extensional data memory) 7 *1
W (internal relay) 8
TU (timer/contact) 9 Read only
CU (counter/contact) 10 Read only