Instruction manual

1
2. Model Name and Peripheral Equipment 1-3
Hardware Specifications
Peripheral Equipment
The following options are available for using the ZM-300 series more effectively
The module to connect ZM-300 to Ethernet. It supports UDP/IP,
corresponds to FA link protocol through FL-net and supports
cyclic transmission and message transmission (word read/write).
- ZM-80NU for Ethernet/FL-net (Ver.1.00)
- ZM-80NU2 for Ethernet/FL-net (Ver.2.00)
Note:
You cannot use ZM-80NU and ZM-80NU2 on the same line .
ZM-1TC
ZM-80NU
ZM-80NU2
ZM-300EM
ZM-300SM
Product name
Model name Use
Expansion memory
Terminal converter
Card recorder
Expansion I/O module
2 ports adapter
Screen data transfer
cable
Screen edit software
ZM-1REC
ZM-322ME
ZM-1MD2
ZM-71S
ZM-71SE
ZM-301EU
ZM-302EU
ZM-303EU
ZM-304EU
Video input sound output module
RGB input sound output module
RGB output sound output module
Sound output module
Japanese version
English version
ZM-80C
Printer cable
Barcode reader
connection cable
Multi-link 2
master cable
MJ-to-D-sub
conversion cable
Installation adapter
ZM-300PC
ZM-80BC
ZM-80MC
ZM-300CC
ZM-300PD
Network module
Option module
A flash memory used to expand the memory capacity for screen
data. Its capacity is 8MB
An SRAM memory used to backup sampling data, internal
memory, and memo pad. Its capacity is 512KB.
Used for screen data backup or for recording of the memory
manager function and the data logging function.
The module to convert the connector for a programmer of
MITSUBISHI’s ACPU/QnACPU/FXCPU into a two-port connector.
Used to connect ZM-300 to a personal computer or connect a
personal computer to ZM-1REC.
Used to connect ZM-300 to a bar code reader.
Used to connect ZM-300 master station to the ZM-300 slave
station in the Multi-link 2 connection.
Used to converts a Dsub 25-pin connector (millimeter screw type)
into a modular jack.
Used to attach ZM-370 to the panel cut of a preceding model
(ZM-70T/70D).
Used to connect to a PLC at the RS-422/485 terminal block.
Used as an external I/O module for PLC. Provides 16 input pins and 16 output pins.
Used to connect ZM-300 to a printer.
Used to make screen data (compliant with
Windows95/98/NT4.0/Me/2000/XP).
ZM-300 needs Ver.2.0.0.0 or higher version.
(When using ZM-373TA/371TL/373TL, ZM-
383S/383SA, use version 2.1.0.0 or a newer version.)
ZM-71SE (screen edit software: English version)
Application software for editing display data for the ZM series.
(Windows95/98/NT4.0/Me/2000/XP compatible) The ZM-300 series is
supported with ver. 2.00 and later.