Instruction manual

3-48 7. PLC2Way
Notes on Screen Data Transfer
Temperature Control/PLC2 Program
When using the temperature control network/PLC2Way communications, it is necessary to
transfer the temperature control/PLC2 program to the ZM-300 series. When the
temperature control network/PLC2Way setting has been made, the program is
automatically transferred to the ZM-300 series together with screen data. When
[ Temp./PLC2] is selected in the [Transfer] dialog, only the temperature control/PLC2
program can be transferred to the ZM-300 series.
When the Main Menu screen is displayed after transferring screen data, the [Extension]
switch appears. If the [Extension] switch does not appear, transfer font data. Pressing the
switch brings up the “Extension Program Info.” screen where the temperature
control/PLC2Way driver setting and temperature control network/PLC2way setting can be
reviewed. For more information, refer to “Chapter 2 LCD Control Terminal Operations.”