Specifications

300 SERIES MAN HOLE DIGGER
FORM GOM12070702, VERSION 1.2
3
DESCRIPTION PAGE
Notice to Operators 5
Operational Instructional Data Sheet 7
Safety Precautions 8
PREPARATION. 8
OPERATION. 10
MAINTENANCE, REPAIR AND STORAGE. 11
GENERAL SAFETY INFORMATION. 13
Assembly 15
INSTALLING THE COMPOSITE MATERIAL OPERATOR HANDLES.
NOTES TO THE THROTTLE CABLE INSTALLATION. 17
Before Starting the Engine 18
FILLING THE ENGINE CRANKCASE WITH OIL.
FILLING THE HOLE DIGGER TRANSMISSION WITH OIL.
TRANSMISSION OIL
RECOMMENDATIONS.
FILLING THE ENGINE FUEL TANK.
Digging Operation 25
OPERATIONAL DISCLAIMER.
CALIFORNIA PROPOSITION 65 DISCLAIMER.
SPARK ARRESTER DISCLAIMER.
INFORMATION RELATIVE TO MINIMUM COMPONENT STANDARDS FOR THE
OPERATION OF THE HOLE DIGGER.
INFORMATION RELATIVE TO COMPOSITE MATERIAL OPERATOR HANDLES.
GENERAL TRANSPORTATION INFORMATION.
DETERMINATION OF POTENTIAL SUBSURFACE HAZARDS IN THE PROPOSED DIGGING
LOCATION(S).
SET UP FOR DIGGING.
STARTING THE ENGINE WITH THE AUGER ATTACHED.
OPERATING THE HOLE DIGGER.
UNDERSTANDING KICKBACK.
BACK CARE/PROPER LIFTING INFORMATION.
MINIMIZING KICKBACK FROM AN OPERATIONAL STANDPOINT.
MINIMIZING KICKBACK FROM A DESIGN STANDPOINT.
OPERATING THE HOLE DIGGER CONTINUED.
STOPPING THE HOLE DIGGER.
TEMPORARY STORAGE FOR THE HOLE DIGGER WHILE ON THE JOB SITE.
ADDING AND REMOVING NONFLIGHTED AND FULL FLIGHTED AUGER EXTENSIONS.
Service
CHANGING THE HOLE DIGGER TRANSMISSION OIL. 35
MAGURA THROTTLE CONTROL MAINTENANCE PROGRAM.
AUGER MAINTENANCE PROGRAM.
REPLACING A WORN AUGER SCREW BIT.
REPLACING WORN AUGER TEETH.
Table of Contents