Technical data

1
2
3
4
Baugröße 1 2 3 4 5 7
B mm 910 1360 1710 2160 2510 3070
L1 mm - - 815 - 598 738
L2 mm - - - 1040* 1215 1495
T mm 865 865 865 865 865 955
T1 mm 785 785 785 785 785 875
Stützen Stk 4 6 10
Rechteckprofile 70 x 40 Stk 4 4 5 5
Mafundstreifen Stk 4 6 10
Schrauben M8 x 30
Stk 8 12 14 22
B
L1
L2
L1
T
T1
5
7
*CW2: 1095
EN/07.2011/raisedfloor/1
12.4 Raised floor stand
The floor stand is used to adjust the height of the A/C unit to the existing raised floor and consists of an encircling
rectangular profile of galvanized steel with adjustable screw sockets. Anti vibration compound is recommended bet-
ween concrete floor and base plate.
Locating the supports
(correspondingly on the other side)
Cabinet size
B mm
mm
mm
mm
mm
Supports n°
Rectangular profiles 70 x 40 n°
Mafund strips n°
Screws M8 x 30
n°
e.g. for size 5 and 7:
Dimensions from inner side of the lateral profile to the middle of the support
L1 - Position of the support without cross beam
L2 - Position of the support with cross beam
Cabinet size:
with the use of a louver at the pressure
side the middle cross beam must be
removed.